Delivering to all 50 states Mon–Sat · 7am–7pm ET
Need help placing yours? ☎ (845) 343-0700
GiantLockBox Cart 0
Modifications · paint + finish

How to paint a shipping container.

Container paint is the most common DIY modification — and the easiest to mess up. The wrong paint peels in a year. The right paint lasts a decade. Here's the practical guide to doing it once.

TL;DR
Cost + scope

Use direct-to-metal (DTM) paint or marine-grade industrial enamel. Prep matters more than the paint — wire-brush the rust, prime any bare spots, then 2 coats. Total cost: $200-$500 in materials for a 20ft container, $400-$900 for a 40ft. Skip exterior latex house paint — it peels in months.

What's involved

The actual work, step by step.

  1. 01

    Prep (most important)

    Pressure-wash or scrub with degreaser. Wire-brush any active rust (not the cargo patina). Sand glossy areas. Tape off door gaskets and hardware.

  2. 02

    Primer (bare metal only)

    Rust-inhibiting primer on any exposed metal. Skip if you're going over factory paint that's still adhered.

  3. 03

    Choose your paint

    Direct-to-Metal (DTM) acrylic for ease + cost. Industrial enamel for max durability. Marine-grade for coastal sites. Never use exterior latex house paint.

  4. 04

    Application

    Sprayer for smooth finish (rent or buy $200-500 unit). Roller works for budget jobs — corrugation needs careful work. Brush only for cut-ins.

  5. 05

    Two coats

    Always two thin coats, not one thick. Let first coat fully cure (24+ hours). Recoat in 2-7 days max — otherwise you re-prep.

  6. 06

    Color choice

    Light colors reflect heat (interior stays cooler). Dark colors hide dents. Bright accent colors fade faster. Industrial gray is the safe default.

Start with the right shell

The container is half the build.

We sell containers, we don't build conversions — but the right starting container makes every step downstream easier. Here's what to pick.

  • → Cargo-Worthy if you're repainting anyway (saves the One-Trip premium)
  • → One-Trip if you want minimal prep (factory paint is already fine)
  • → Any condition for industrial / fleet branding wraps over fresh paint
Browse containers →
Avoid these

Common mistakes that ruin the project.

Spec the right starting container

Spec a container ready for paint

Tell us your project — size, finish level, climate. We'll match the container shell that makes your conversion easier. We don't build the conversion; we make sure you start with the right shell.

Call (845) 343-0700
Call a Placement Expert

(845) 343-0700

Mon–Sat · 7am–7pm ET · Real humans, no call center

71 Dolson Ave · Middletown, NY 10940
☎ Call a placement expert (845) 343-0700