Delivering to all 50 states Mon–Sat · 7am–7pm ET
Need help placing yours? ☎ (845) 343-0700
GiantLockBox Cart 0
Modifications · electrical

Electrical for a shipping container: what you need.

Most container builds need at least basic power — lighting, outlets, maybe HVAC. The wiring is the same as any small structure, but the container's all-steel construction adds a few specifics. Here's what you'll need to plan.

TL;DR
Cost + scope

Basic 110V circuit (lighting + outlets): $500-$1,500 installed. Full subpanel (multiple circuits, HVAC, appliances): $2,500-$6,000. Always use a licensed electrician — container homes especially require code-compliant work and inspection. Steel walls are forgiving for grounding but unforgiving for shortcuts.

What's involved

The actual work, step by step.

  1. 01

    Service entrance

    Underground feed from a utility pole or main panel. Run conduit, terminate at a subpanel inside the container.

  2. 02

    Subpanel sizing

    60-amp subpanel for storage with lighting + outlets. 100-amp for a workshop with welder or compressor. 200-amp for a container home.

  3. 03

    Conduit + wiring

    EMT conduit run along the corrugation. Romex inside conduit, or MC cable direct. Steel walls = excellent grounding when done right.

  4. 04

    Outlets + lighting

    Standard residential. GFCI for outdoor or wet locations. LED panels work well for high-cube interiors.

  5. 05

    HVAC circuit

    Mini-split or window AC needs a dedicated 240V (or 120V) circuit. Plan for it early — adding it later means trenching.

  6. 06

    Permits + inspection

    Required for container homes. Optional but recommended for workshops. Skip them at storage shelters? Probably fine, but ask your insurer.

Start with the right shell

The container is half the build.

We sell containers, we don't build conversions — but the right starting container makes every step downstream easier. Here's what to pick.

  • → Standard container for storage with basic lighting
  • → High-Cube for workshops where overhead conduit needs clearance
  • → One-Trip for container homes (cleaner interior, easier conduit attachment)
  • → Pre-fab insulated for builds that combine electrical + insulation early
Browse containers →
Avoid these

Common mistakes that ruin the project.

Spec the right starting container

Spec a container ready for electrical

Tell us your project — size, finish level, climate. We'll match the container shell that makes your conversion easier. We don't build the conversion; we make sure you start with the right shell.

Call (845) 343-0700
Call a Placement Expert

(845) 343-0700

Mon–Sat · 7am–7pm ET · Real humans, no call center

71 Dolson Ave · Middletown, NY 10940
☎ Call a placement expert (845) 343-0700